Electro-enclosure VDS

DESCRIPTION:

Electric lock for automatic garage doors, compatible with all control panels of the market power supply at 12v, has a push button that if you do not want to use you can deactivate it in an easy way, turning the key in the opposite direction with the electroclace vds you can add security to any type of garage door, portal or any other application

FUNCTION:
The electric lock can be operated by electric impulse or by push button if it is enabled with the key. High security and protection for garage doors and gates is guaranteed. It is equipped with the button that can be activated or deactivated by turning the key. Suitable for intercom or access control systems, for residential and industrial use. This product can be installed on swing doors or hinges that do not exceed 300 kg.

INSTALLATION:
Use the screws to install the lock and brake. A minimum distance of 5 mm of installation of the lock body of the stop is recommended. The spring load can be adjusted in relation to the weight of the door and the closing speed by the internal hexagonal nut. Use a voltage of 9-12VDC. With unlocked electric lock if the lock button is pressed it will automatically unlock within 1 second.

ATTENTION:
The electrical impulse should not exceed 8 seconds. To lubricate the mechanism it is recommended to use powdered graphite lubricant.

ELECTRICAL CONNECTION:
Use wires that have cross-sections calculated on the basis of the length of the circuit and in any case, not less than 1 Mm. Efficient operation of electric lock is not guaranteed with voltage input less than 8V, measured directly on the locking terminal board, during electrical impulse.

With our electric lock, you can also replace another type of electric locks type cisa or viro is compatible with all the control panels of swinging or folding doors on the market as well as with video intercoms or telephones.